Instructions for attaching M92 Reducer or Flattener to Altair Focuser:
- Loosen (but do not remove) the 2.0mm Hex Grub Screws from the rear of the focuser.
- Unscrew the rear 2″ push-fit adaptor assembly to reveal the M92 inner thread on the rear of the focuser.
- The reducer can then be screwed onto the focuser for a stable fit.
- Most reducers will have a rear adaptor which gives 55mm sensor to flange spacing, so be sure to look up your camera sensor to flange distance to work out what adaptors you need.

Altair M92 Focuser Instructions Step 1 – loosening the 3x grub screws to enable the push-fit adaptor to be unscrewed from the focuser drawtube.